Scanning; Selecting The Scan Type - Standard Horizon GX2200 Owner's Manual

The priority channel may be changed from CH16 to another channel.
Refer to section "11.5 PRIORITY CHANNEL".
8.9

SCANNING

The GX2200 will automatically scan channels programmed into the preset
channel memory and also the scan channel memory, and the last selected
weather channel.
When an incoming signal is detected on one of the channels during scan, the
radio will pause on that channel, allowing you to listen to the incoming trans-
mission. The radio will automatically start scanning again after the transmis-
sion stops.

8.9.1 Selecting the Scan Type

1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " CH FUNCTION
SETUP ".
3. Press the
TYPE " with the CH knob.
4. Press the
5. Rotate the CH knob to select " PRIORITY
SCAN " or " MEMORY SCAN ".
6. Press the
selected setting.
7. Press the
CH88A
CH68A
CH68A
CH61A
M S
eMory
GX2200
key until " Setup
CALL
MENU
soft key, then select " SCAN
soft key.
soft key to store the
soft key two times to return to radio operation.
CH01A
CH09
CH12
CH15
CH18
CH22A
( M-SCan )
Can
NOTE
CH88A
CH68A
CH68A
CH61A
p
riority
-Scan Type-
PRIORITY SCAN
Memory Scan
ENT
CH01A
CH09
Priority Channel
CH18
CH22A
( p-SCan )
S
Can
Page 39
QUIT
CH12
CH15