Position Report; Transmitting A Dsc Position Report Call - Standard Horizon GX2200 Owner's Manual

9.8

POSITION REPORT

The feature is similar to position request, however instead of requesting a
position of another vessel this function allows you to send your position to
another vessel. Your vessel must mark the internal GPS receiver for the
GX2200 to send the position.
To transmit a position report call, the GX2200 individual directory
must be programmed with stations you wish to send your position
to. To setup this directory refer to section "9.5.1 Setting up the Indi-
vidual / Position Call Directory."

9.8.1 Transmitting a DSC Position Report Call

DSC Position Report Call using the Individual/Position Directory
1. Press the
appear.
2. Rotate the CH knob to select " POS REPORT ".
(To cancel, press the
3. Press the
4. Rotate the CH knob to select the name in
the directory, then press the
key.
5. Press the
position to the selected vessel.
6. Press the
operation.
GX2200
key. The " DSC Menu " will
CALL
MENU
soft key.)
soft key.
soft key to send your
soft key to return to radio
NOTE
soft
Page 75