Unit Of Measure - Standard Horizon GX2200 Owner's Manual

10.5 UNIT OF MEASURE

Allows navigation and AIS displays to be shown in "Knot", "Mile/Hour" or
"Kilo-Meter/Hour" (for speed), "Nautical Mile" or "Kilo-Meter" (for distance),
and "Feet" or "Meter" (for altitude).
GPS fix from the internal antenna or a NMEA signal from an external
GPS or chart plotter must be received.
1. Press and hold the
appears.
2. Rotate the CH knob to select " GENERAL SETUP "
menu.
3. Press the
knob to select " UNIT OF MEASURE ".
4. Press the
5. Rotate the CH knob to select " SPEED ", " DISTANCE ",
or " ALTITUDE " which you wish to change.
6. Press the
knob to select desired unit. Available selections
are KTS (knots), MPH (mile/hour), or KMH (kilo-
meter/hour) for speed, NM (nautical mile), SM
(statute mile) or KM (kilometer) for distance, and
FT (feet) or M (meter) for altitude.
7. Press the
level.
8. Press the
GX2200
NOTE
key until " Setup Menu "
CALL
MENU
soft key, then rotate the CH
soft key.
soft key, then rotate the CH
soft key to store the selected
soft key three times to return to radio operation.
-Unit of Measure-
SPEED
Distance
Altitude
SELECT QUIT
-Speed Unit-
KTS:KNOTS
MPH:Mile/Hour
KMH:Kilo-Meter/Hour
ENT QUIT
Page 93