15.11 NMEA OUTPUT
This selection is used to setup the NMEA output sentences of the GX2200.
By default, all the NMEA sentences are turned "Off".
1. Press and hold the
Menu " appears.
2. Rotate the CH knob to select " GPS SETUP "
menu.
3. Press the
OUTPUT " with the CH knob.
4. Press the
5. Rotate the CH knob to select the desired
sentence type, then press the
key.
6. Rotate the CH knob to select " ON " or " OFF ".
7. Press the
setting.
8. Repeat steps 5 through 7 to set the other sentences.
9. Press the
GX2200
key until " Setup
CALL
MENU
soft key, then select " NMEA
soft key.
soft key to save the new
soft key twice to return to radio operation.
soft
Page 125