Waypoints; Marking A Position - Standard Horizon MATRIX GX2100 Owner's Manual

16 WAYPOINTS

The GX2000/GX2100 is capable of storing up to 100 waypoint and navigating
to them using the compass page.
In addition DSC distress calls with position or a position received from a an-
other DSC radio using DSC polling can be navigated to.

16.1 MARKING A POSITION

This feature allows the radio to mark the current position of the vessel.
1. Press and hold down the [ CALL ( MENU )] key
until "Setup Menu" appears.
2. Rotate the CHANNEL knob to select
"WAYPOINT SETUP".
3. Press the [ SELECT ] soft key, then select "WAYPOINT
DIRECTORY" with the CHANNEL knob.
4. Press the [ SELECT ] soft key, then select
"MARK POSITION" with the CHANNEL knob.
5. Press the [ SELECT ] soft key, then enter the
Waypoint Name, by rotating the CHANNEL
knob to select the first letter.
6. Press the [ ENT ] soft key to store the first let-
ter and to move to the second letter in the
name.
7. Repeat step 5 and 6 until the name is shown. Press
the [ ENT ] soft key to skip a letter if needed.
8. Press and hold the [ ENT ] soft key two times to save the waypoint into
memory.
9. Press the [ QUIT ] soft key several times to return to radio operation.
Page 108 GX2000/GX2100