Enabling/Disabling Auto Pos Polling - Standard Horizon GX2200 Owner's Manual

5. T h e r a d i o w i l l s h o w t h e s t a t i o n s
programmed in the individual directory.
Rotate the CH knob to select the desired
station and press the
6. Repeat steps 4 and 5 for CALL 2, CALL 3
and CALL 4 entries.
7. When finished, press the
mode.

9.10.3 Enabling/Disabling Auto POS Polling

1. Press the
appear.
2. Rotate the CH knob to select " AUTO POS
POLLING ", then press the
3. Rotate the CH knob to select the " ACTIVA-
TION ", then press the
4. Select " START " to enable transmissions to
the stations or " STOP " to disable transmis-
sions to stations.
5. Press the
6. Press the
return to radio operation.
When the radio receives position reports from a
called vessel the display will show the image as
in the right and also output NMEA 0183 DSC
and DSE sentences to a GPS chart plotter.
Page 82
key. The " DSC Menu " will
CALL
MENU
soft key.
soft key two times to
soft key.
soft key three times to exit to the radio
soft key.
soft key.
NOTE
-Auto POS Polling-
CALL 1:HORIZON
Call 2:
Call 3:
Call 4:
SELECT CALL
-Auto POS Polling-
ACTIVATION
Select Address
-Auto POS Polling-
START
QUIT
SELECT Stop
ENT
QUIT
QUIT
GX2200