Ais Range; Transmitting An Individual Call To An Ais Ship - Standard Horizon GX2200 Owner's Manual

13.2.1 AIS Range

You may change the display range of the AIS
screen. Press one of the soft keys, then press the
key to display the range selection screen.
RANGE
Rotate the CH knob to select the desired range
and press the
range.
You may change the display range unit of the AIS screen, refer to
section "10.5 UNIT OF MEASURE".

13.2.2 Transmitting an Individual Call to an AIS Ship

It is possible for the GX2200 to transmit a DSC individual call to a received
AIS target by the procedure below:
1. Press one of the soft keys, then press the
soft key.
2. Rotate the CH knob to select the operating chan-
nel you want to communicate on and press the
soft key.
3. To transmit an individual DSC call to the select
AIS ship, press the
After the GX2200 transmits, the radio waits for
the DSC radio on the AIS ship to transmit a reply,
at which time the radio will ring like a telephone.
Pick up the mic, press the PTT switch and hail
the AIS vessel.
4. Press the
5. Press the
Page 110
soft key to save the new
soft key.
soft key to return to AIS screen.
key to return to radio screen.
AIS
NOTE
16
GX2200