Sbas ( Satellite Based Augmentation System ) - Standard Horizon GX2200 Owner's Manual

1. Press and hold the
appears.
2. Rotate the CH knob to select " GPS SETUP " menu.
3. Press the
knob to select " POS DATA PRIORITY ".
4. Press the
5. Rotate the CH knob to select the desired position
data source.
6. Press the
setting.
7. Press the
radio operation.

15.10 SBAS ( Satellite Based Augmentation System )

This selection enables or disables SBAS such as WAAS, EGNOS and MSAS
as some areas (Australia for example) can have problems with GPS recep-
tion with SBAS enabled. The default setting is "ON".
1. Press and hold the
appears.
2. Rotate the CH knob to select " GPS SETUP " menu.
3. Press the
knob to select " SBAS ".
4. Press the
5. Rotate the CH knob to select " ON " or " OFF ".
6. Press the
setting.
7. Press the
radio operation.
Page 124
key until " Setup Menu "
CALL
MENU
soft key, then rotate the CH
soft key.
soft key to store the new
soft key two times to return to
key until " Setup Menu "
CALL
MENU
soft key, then rotate the CH
soft key.
soft key to store the new
soft key two times to return to
GX2200