Transmitting A Group Call - Standard Horizon GX2200 Owner's Manual

9.6.2 Transmitting a Group Call

Group Call using the Group Directory
1. Press the
appear.
2. Rotate the CH knob to select " GROUP ". (To
cancel, press the
3. Press the
will beep, and the last group calls will
appear.
4. Rotate the CH knob to select a group you
want to contact.
Press the
other than those on the display.
5. Press the
knob to select the operating channel you
want to communicate on, then press the
soft key.
6. Press the
group call signal.
7. When the group call signal is sent, the
display will be as shown in the illustration at
the right.
8. After the group call is transmitted, all the
radios in the group will switch to the desig-
nated channel.
9. Listen to the channel to make sure it is not busy, then press the micro-
phone's PTT switch and call the other vessel you desire to communicate
with.
GX2200
key. The " DSC Menu " will
CALL
MENU
soft key.)
soft key. The transceiver
soft key to select a group
soft key, rotate the CH
soft key to transmit the
Page 67