No Action Timer On Dsc Operation; No Action Timer On Distress Operation - Standard Horizon GX2200 Owner's Manual

12.11 NO ACTION TIMER ON DSC OPERATION

If a key is not pressed during the DSC operation, the GX2200 will automati-
cally return to radio operation.
This menu selection allows the automatic switch time to be changed. The
default selection is 15 minutes.
1. Press and hold the
appears.
2. Rotate the CH knob to select " DSC SETUP ".
3. Press the
TIMER ON DSC " with the CH knob.
4. Press the
knob to the desired time and press the
soft key.
5. Press the
operation.

12.12 NO ACTION TIMER ON DISTRESS OPERATION

If a key is not pressed during the distress operation, the GX2200 will auto-
matically return to radio operation.
This menu selection allows the automatic switch time to be changed. The
default selection is "OFF".
1. Press and hold the
appears.
2. Rotate the CH knob to select " DSC SETUP ".
3. Press the
TIMER ON DIST " with the CH knob.
4. Press the
knob to the desired time and press the
soft key.
5. Press the
operation.
GX2200
key until " Setup Menu "
CALL
MENU
soft key, then select " NO ACT
soft key, then rotate the CH
soft key twice to return to radio
key until " Setup Menu "
CALL
MENU
soft key, then select " NO ACT
soft key, then rotate the CH
soft key twice to return to radio
Page 107