Changing The Time Format; Changing Cog To True Or Magnetic - Standard Horizon GX2200 Owner's Manual

6.9

CHANGING THE TIME FORMAT

This menu selection allows the radio to setup to show time in 12-hour or
24-hour format.
1. Press and hold the
appears, then select " GPS SETUP " with the CH
knob.
2. Press the
knob to select " TIME DISPLAY ".
3. Press the
4. Rotate the CH knob to select " 12 HOUR " or " 24
HOUR ".
5. Press the
setting.
6. Press the
radio operation.

6.10 CHANGING COG TO TRUE OR MAGNETIC

Allows the GPS COG (Course Over Ground) and the BRG from an AIS target
to be selected to show in True or Magnetic. Factory default is "True" however
by following the steps below the COG can be changed to "Magnetic".
1. Press and hold the
appears, then select " GPS SETUP " with the CH
knob.
2. Press the
knob to select " MAGNETIC ".
3. Press the
4. Rotate the CH knob to select " M A G N E T I C " or
" TRUE ".
5. Press the
setting.
6. Press the
radio operation.
Setting to "Magnetic" is effective only when the RMC sentences with
magnetic data are input from external devices such as a GPS receiv-
er. It is ineffective when using the internal GPS of the GX2200.
Page 26
key until " Setup Menu "
CALL
MENU
soft key, then rotate the CH
soft key.
soft key to store the selected
soft key two times to return to
key until " Setup Menu "
CALL
MENU
soft key, then rotate the CH
soft key.
soft key to store the selected
soft key two times to return to
NOTE
-Magnetic-
TRUE
Magnetic
ENT QUIT
GX2200