Changing The Time Location - Standard Horizon GX2200 Owner's Manual

1. Press and hold the
Menu " appears, then select " GPS SETUP " with
the CH knob.
2. Press the
OFFSET " with the CH knob.
3. Press the
CH knob to select time offset of your loca-
tion. See illustration above to find your offset
time. If " 00:00 " is assigned, the time is the
same as UTC or GPS satellite time.
4. Press the
5. Press the
6.8

CHANGING THE TIME LOCATION

This menu selection allows the radio to show UTC time or local time with the
offset.
1. Press and hold the
appears, then select " GPS SETUP " with the CH
knob.
2. Press the
knob to " TIME AREA ".
3. Press the
4. Rotate the CH knob to select " UTC " or " LOCAL ".
5. Press the
setting.
6. Press the
radio operation.
GX2200
key until " Setup
CALL
MENU
soft key, then select " TIME
soft key, then rotate the
soft key to store the time offset.
soft key two times to return to radio operation.
key until " Setup Menu "
CALL
MENU
soft key, then rotate the CH
soft key.
soft key to store the selected
soft key two times to return to
-Time Offset-
+02:30
+02:00
+01:30
+01:00
+00:30
00:00
ENT QUIT
-Time Area-
UTC
Local
ENT QUIT
Page 25