Keithley 2001 Operator's Manual page 456

SCPI Conformance Information
Command
:ARM[:SEQuence[1]]
[:LAYer[1]]
:IMMediate
:COUNt <n>
:COUNt?
:SOURce <name>
:SOURce?
:SIGNal
:LAYer2
:IMMediate
:COUNt <n>
:COUNt?
:DELay <n>
:DELay?
:SOURce <name>
:SOURce?
:TIMer <n>
:TIMer?
:SIGNal
:TRIGger[:SEQuence[1]]
:IMMediate
:COUNt <n>
:COUNt?
:DELay <n>
:DELay?
:SOURce <name>
:SOURce?
:TIMer <n>
:TIMer?
:SIGNal
:UNIT
:TEMPerature <name>
:TEMPerate?
q~ÄäÉ=fJQ=póåí~ñ=çÑ=åçåJp`mf=Åçãã~åÇë=áãéäÉãÉåíÉÇ=Äó=íÜÉ=jçÇÉä=OMMN
Command
:CALCulate[1]
:KMATh
:MMFactor <NRf>
:MMFactor?
:MBFactor <NRf>
:MBFactor?
:PERCent <NRf>
:PERCent?
I-8
Description
Subsystem command path to configure arm layers:
Path to program arm layer 1:
Loop around control source.
Program arm count (1 to 99999, or INF).
Query arm count.
Select control source: HOLD, IMMediate, MANual, BUS, TLINk, EXTernal.
Query control source.
Loop around control source.
Path to program arm layer 2.
Loop around control source.
Program scan count (1 to 99999, or INF).
Query scan count.
Program delay (0 to 999999.999 sec).
Query delay.
Select control source: HOLD, IMMediate, TIMer, MANual, BUS, TLINk,
EXTernal.
Query control source.
Set timer interval (0 to 999999.999 sec).
Query timer.
Loop around control source.
Path to program trigger layer:
Loop around control source.
Program measure count (1 to 99999, or INF).
Query measure count.
Program delay (0 to 999999.999 sec).
Query delay.
Select control source: HOLD, IMMediate, TIMer, MANual, BUS, TLINk,
EXTernal.
Query control source.
Set timer interval (0 to 999999.999 sec).
Request the programmed timer interval.
Loop around control source.
Select temperature measurement units: C, CEL, F, FAR, K.
Query temperature units.
Description
Subsystem to control CALC 1:
Path to configure math calculations:
Specify "m" for mX+b (-9.99e35 to +9.99e20).
Query "m" factor.
Specify "b" for mX+b (-9.99e35 to +9.99e30).
Query "b" factor.
Set Percent value (-2.0e9 to +2.0e9).
Query PERCENT.
2001-900-01 Rev. K / August 2010