Keithley 2001 Operator's Manual page 413

q~ÄäÉ=`JT=E`çåíáåìÉÇF
SENSe command summary
[:SENSe[1]]
:TEMPerature
:RTD
:TYPE <name>
:TYPE?
:ALPHa <NRf>
:ALPHa?
:BETA <NRf>
:BETA?
:DELTa <NRf>
:DELTa?
:RZERo <NRf>
:RZERo?
:SPRTD
:RZERo <NRf>
:A4 <NRf>
:B4 <NRf>
:A7 <NRf>
:B7 <NRf>
:C7 <NRf>
:TCouple
:TYPE <name>
:TYPE?
:RJUNctionX
:RSELect <name>
:RSELect?
:SIMulated <n>
:SIMulated?
:REAL
:TCOefficient <n>
:TCOefficient?
:OFFSet <n>
:OFFSet?
:ACQuire
:SENSe2
:TTL[1]
:DATA?
2001-900-01 Rev. K / August 2010
Path to configure RTD measurements:
Select RTD type: PT100, D100, F100, PT385, PT3916, USER or SPRTD.
Query RTD type.
Specify constant for USER type (0 to 0.01).
Query alpha.
Specify constant for USER type (0 to 1).
Query beta.
Specify constant for USER type (0 to 5).
Query delta.
Specify constant for USER type (0 to 1000).
Query rzero.
Select SPRTD type parameters.
Set sensor 0°C R value.
Set A4 coefficient.
Set B4 coefficient.
Set A7 coefficient.
Set B7 coefficient.
Set C7 coefficient.
Path to configure TC measurements:
Select thermocouple type: J, T, K, E, R, S, B, N.
Query TC type.
Path to configure reference junctions (X = 1 to 5).
Select reference type: SIMulated, REAL.
Query reference type.
Specify simulated temperature.
Query simulated temperature.
Command path to specify "real" reference junction
Specify TC
Query TC
Specify voltage offset at 0°C.
Query voltage offset.
Update reference temperature.
Path to read digital input port:
Query (read) the digital input port.
SCPI Command Subsystems
C-15