Controller Programs - Keithley 2001 Operator's Manual

The following programs have been supplied as a simple aid
to the user and are not intended to suit specific needs. Each
program allows you to send a command message to the
instrument and obtain and display a response from the
instrument for query commands.
Programs for the following controllers are included:
• A BASIC program for an IBM PC/XT/AT with a
Capital Equipment Corporation PC<>488 Interface

Controller Programs

(Keithley Model PC-488-CEC IEEE-488 Interface
Card).
• A BASIC program for an IBM PC/XT/AT with IOtech
Driver488 Software.
• A BASIC program for a Hewlett-Packard Model 9000
Series 200/300 computer.
• A program written with the ASYST software package
(available from Keithley Instruments) for an IBM PC/
XT/AT with a Capital Equipment Corporation
PC<>488 Interface.
• A BASIC program for an IBM PC/XT/AT with a
National GPIB PC Interface.
F