Keithley 2001 Operator's Manual page 450
Multimeter
Hide thumbs
Also See for 2001:
- Operator's manual (488 pages) ,
- Repair manual (168 pages) ,
- Calibration manual (107 pages)
Table of Contents
Advertisement
SCPI Conformance Information
Command
:CALCulate3
:LIMit[1]
:STATe <b>
:STATe?
:FAIL?
CLEAR
[:IMMediate]
:AUTO <b>
:AUTO?
:LIMit2
:UPPer
[:DATA] <n>
[:DATA]?
:SOURce <NRf>
:SOURce?
:LOWer
[:DATA] <n>
[:DATA]?
:SOURce <NRf>
:SOURce?
:STATe <b>
:STATe?
:FAIL?
:CLEAR
[:IMMediate]
:AUTO <b>
:AUTO?
:IMMediate
:DISPlay
[:WINDow[1]]
:TEXT
:DATA <a>
:DATA?
:STATe <b>
:STATe?
:WINDow2
:TEXT
:DATA <a>
:DATA?
:STATe <b>
:STATe?
:ENABle <b>
:ENABle?
:FORMat
[:DATA] <type>[,<length>]
[:DATA]?
:BORDer <name>
:BORDer?
I-2
Description
Enable (1 or ON) or disable (0 or OFF) limit test.
Query state of limit test.
Query test result (1 = pass, 0 = fail).
Path to clear failed test:
Clear failed test indication.
Enable (1 or ON) or disable (0 or OFF) auto clear.
Query auto clear.
Path to control LIMIT 2 test:
Path to configure upper limit:
Specify upper limit (-9.99e35 to +9.999999e35).
Query upper limit.
Specify digital output (0 to 15).
Query source (digital output value).
Path to configure lower limit:
Specify lower limit (-9.99e35 to +9.999999e35).
Query lower limit.
Specify digital output (0 to 15).
Query source (digital output value).
Enable (1 or ON) or disable (0 or OFF) limit test.
Query state of limit test.
Query test result (1 = pass, 0 = fail).
Path to clear failed test:
Clear failed test indication.
Enable (1 or ON) or disable (0 or OFF) auto clear.
Query auto clear.
Re-perform limit tests.
Path to locate message to top display.
Path to control user text messages.
Define ASCII message "a" using up to 20 characters.
Query text message.
Enable (1 or ON) or disable (0 or OFF) message mode.
Query text message mode (0 or 1).
Path to locate message to bottom display.
Path to control user text messages.
Define ASCII message "a" using up to 32 characters.
Query text message.
Enable (1 or ON) or disable (0 or OFF) message mode.
Query text message mode (0 or 1).
Turn on (1 or ON) or turn off (0 or OFF) the front panel display.
Query state of the display (0 or 1).
Select data format: ASCii, REAL, 32, REAL, 64, SREal or DREal.
Query data format.
Select binary byte order: NORMal, SWAPped.
Query byte order.
2001-900-01 Rev. K / August 2010
Advertisement
Table of Contents
