Initiate Commands - Keithley 2001 Operator's Manual

Multimeter
Hide thumbs Also See for 2001:
Table of Contents

Advertisement

q~ÄäÉ=QJPO=E`çåíáåìÉÇF
Trigger command summary
:TRIGger[:SEQuence[1]]
:IMMediate
:COUNt <n>
:COUNt?
:DELay <n>
:DELay?
:SOURce <name>
:SOURce?
:TIMer <n>
:TIMer?
:SIGnal
:TCONfigure
:PROTocol <name>
:PROTocol?
:DIRection <name>
:DIRection?
:ASYNchronous
:ILINe <NRf>
:ILINe?
:OLINe <NRf>
:OLINe?
:SSYNchronous
:LINE <NRf>
:LINE?
Notes:
1. Brackets ([ ]) are used to denote optional character sets. These optional characters do not have to be included in the program message. Do not use brackets
([ ]) in the program message.
2. Angle brackets (< >) are used to indicate parameter type. Do not use angle brackets (< >) in the program message.
3. Upper case characters indicate the short-form version for each command word.

4.24.1 :INITiate commands

Format
Description
Programming example
2001-900-01 Rev. K / August 2010
Path to program trigger layer:
Loop around control source.
Program measure count (1 to 99999, or INF).
Query measure count.
Program delay (0 to 999999.999 sec)
Query delay.
Select control source: HOLD, IMMediate, TIMer, MANual, BUS, TLINk,
EXTernal.
Query control source.
Set timer interval (0.001 to 999999.999 sec)
Request the programmed timer interval.
Loop around control source.
Path to configure Triggers:
Select protocol: ASYNchronous, SSYNchronous.
Query protocol.
Enable (SOUR) or disable (ACC) Bypass: SOURce, ACCeptor.
Query direction.
Path to configure asynchronous Trigger Link:
Select input line (1 to 6).
Query input line.
Select output line (1 to 6).
Query output line.
Path to configure semi-synchronous Trigger Link:
Select trigger line (1 to 6).
Query trigger line.
[:IMMediate]
:INITiate[:IMMediate]
:init
This command takes the Model 2001 out of the idle state. After all programmed operations are completed,
the instrument will leave the trigger structure and return to the idle state (if continuous initiation is dis-
abled; see next command).
OUTPUT 716; ":init"
Take 2001 out of idle
! Takes 2001 out of the idle state.
IEEE-488 Reference
4.24.3
4.24.4
4.24.5
4.24.6
4.24.7
4.24.8
4.24.9
4-213

Advertisement

Table of Contents
loading

Table of Contents