Manual Operation - Centurion D2 Turbo Installation Manual

26. Manual Operation

26.1. Disengage the gearbox/drive
To manually override the operator you will need to:
1. Open the camlock cover, insert the
camlock key and rotate it 90° clockwise
(the cover can also be removed at this
stage if so desired). This will allow for
the rotation of the Manual Release
thumbwheel.
By turning the Manual Release
thumbwheel 90° counter-clockwise until
it clicks, the motor pinion will be put into
'Manual Mode'.
26.2. Re-engage
gearbox/drive
To re-engage the drive mechanism of the
operator you will need to:
1. Turn the Manual Release thumbwheel
90° clockwise until it clicks.
2. Once you have re-engaged the drive
mechanism don't forget to lock the
camlock by inserting the key and
rotating it 90° counter-clockwise – this
will help prevent unauthorised tampering
with the operator.
3. By locking the camlock, the Manual Release thumbwheel cannot be moved from
'locked' to 'unlocked' and vice versa.
page 84
FIGURE 138.
FIGURE 139.
FIGURE 140.