22.5. Setting the Autoclose feature
The Autoclose feature can be selected to be either Off or Activated, with a pre-selected
time delay.
22.5.1. Activating the Autoclose feature
To activate the Autoclose, with a pre-selected time delay, please follow the steps below:
Step 1: Rotate the Function Dial to the
AUTOCLOSE position (C).
Step 2: Rotate the Setting Dial to the
desired time delay setting along the 'C' row
of options. You can choose either 5 seconds,
10 seconds, 15 seconds, 30 seconds or
45 seconds.
Step 3: Press the pushbutton to select your
choice.
The Status LED will change from red to
green indicating that the Autoclose feature
has been activated with the delay time
selected in Step 2.
page 66
FIGURE 106.
FIGURE 108.