Centurion D2 Turbo Installation Manual page 8

 Safety devices such as gate safety infrared beams must be fitted to
the installation to guard against mechanical movement risks such as
crushing, dragging and shearing
 It is recommended that at least one warning indicator light be fitted
to every system
 Always fit the warning signs visibly to the inside and outside of the
gate
 The installer must explain and demonstrate the manual override
operation of the gate in case of an emergency, and must hand the
User Guides and Safety/Warning documents over to the end-user
 Explain these safety instructions to all persons authorised to use this
gate, and be sure that they understand the hazards associated with
automated gates
 Do not leave packing materials (plastic, polystyrene, etc.) within
reach of children as such materials are potential sources of danger
 Dispose of all waste products like packaging materials, worn-out
batteries, etc, according to local regulations.
 Always check the obstruction detection system, and/or safety devices
for correct operation prior to handover. During the handover of the
system, explain to the end-user how to perform these checks to
confirm that all safety devices are operating correctly
 Centurion Systems does not accept any liability caused by improper
use of the product, or for use other than that for which the
automated system was intended
 This product was designed and built strictly for the use indicated in
the documentation provided with the product. Any other use, not
expressly indicated within the documentation, could be a source of
danger and/or compromise the service life/operation of the product
Everything not expressly specified in these instructions is not
permitted.
page 4