Centurion D2 Turbo Installation Manual page 77

22.9. Setting the Operating Profiles
Three Operating Profiles, Positive Close Mode, Speed and Collision Sensitivity, can each
be configured depending on your individual requirements.
22.9.1. Positive Close Mode
To activate or deactivate Positive Close Mode, please follow the steps below:
Step 1: Rotate the Function Dial to the
PROFILE position (E).
Step 2: Rotate the Setting Dial to PCM
on/off along the 'E' row of options.
Step 3: Press the pushbutton to toggle the
chosen mode between On and Off.
The Status LED will change from red to
green indicating that the selected Positive
Close Mode has been activated, or it will
change to red indicating that it has been
deactivated.
Step 4: Return the Function Dial to the RUN
position.
page 73
FIGURE 128.
FIGURE 129.
FIGURE 130.