Vector2 Manual Override; Disengaging The Operator - Centurion Vector2 User Manual

2. VECTOR2 manual override

2.1. Disengaging the
operator
Most gate operators have a
means of manually operating
the gate in the event of a total
malfunction of the equipment.
The VECTOR2 can be manually
released, by turning a
removable key through 180° in
the camlock mounted on the
main housing of the VECTOR2
operator.
 Fit the key into the camlock
and rotate through 180°
 Gate can be pushed open
manually
Close the camlock
cover after removing
the key to reduce the
ingress of dirt into the
lock mechanism
The manual release
keys MUST be kept in a
safe place as they are
unique to the operator
and, if lost, will require
the operator to be sent
to a CENTURION
service centre to have
the lock replaced
Please record the
number of the keys as
with this number,
replacement keys can
be cut at most
locksmiths (applicable
in the Republic of South
Africa only)
page 5
Manual
Override
FIGURE 2
FIGURE 3
FIGURE 3