Manual Override; Disengage The Gearbox/Drive; Re-Engage The Gearbox/Drive - Centurion D2 Turbo User Manual

2.1. Disengaging the
Manual
gearbox/drive
Override
To manually override the
operator you will need to: Open
the camlock cover, insert the
camlock key and rotate it 90°
clockwise (the operator cover
can also be removed at this
stage if so desired).
This will allow for the rotation of
the Manual Release
thumbwheel.
By turning the Manual Release
thumbwheel 90° counter-
clockwise until it clicks, the
motor pinion will be put into
'Manual Mode'.
2.2. Re-engaging
gearbox/drive
To re-engage the drive
mechanism of the operator, turn
the Manual Release thumbwheel
90° clockwise until it clicks.
Once you have re-engaged the
drive mechanism don't forget to
lock the camlock by inserting
the key and rotating it 90?
counter-clockwise – this will
help prevent unauthorised
tampering with the operator.
By locking the camlock, the
Manual Release thumbwheel
cannot be moved from 'locked'
to 'unlocked' and vice versa.

2. Manual Override

page 4
FIGURE 2
FIGURE 3