D5-Evo Domestic Manual Override; Disengage The Gearbox/Drive; Re-Engage The Gearbox/Drive - Centurion D10 User Manual

2. D5-Evo DOMESTIC Manual Override

2.1. Disengaging the
gearbox/drive
Carefully flip to the side the camlock
cover and insert the key and rotate
it 90° clockwise.
While holding onto the key, pull
open the access door to expose the
manual override thumbwheel.
This will allow for the removal of the
cover, as well as for the rotation of
the release thumbwheel.
Rotate the thumbwheel clockwise
until gearbox releases and gate can
be moved manually.
If the gearbox must be left in
manual mode for an extended period
of time for whatever reason, it is
recommended that the access door
is locked. This secures the cover and
prevents access to the inside of the
unit, which could contain high
voltages. It also prevents theft of
any components and provides full
protection from the elements.
Do not remove the
thumbwheel. Removal
of the thumbwheel may
result in water entering
the gearbox and the
warranty will be void
2.2. Re-engaging the
gearbox/drive
Rotate thumbwheel anticlockwise
until thumbwheel feels loose in the
hand. Make sure that the manual
override access door can be closed.
Slide gate until gearbox/drive
engages. Never run the motor before
the unit is engaged.
www.CentSys.com page 13
FIGURE 3
FIGURE 4