You can choose from the following settings:
Tx TRG to assign a remote control button to be learned into the system and
trigger the gate to fully open
Tx PED to assign a remote control button to be learned into the system and
partially open the gate for a pedestrian
Tx LCK to assign a remote control button to be learned into the system and
activate Holiday Lockout Mode
Step 3: Press the pushbutton to select the
setting chosen from above – the Status LED
will change from red to green to confirm the
setting.
Step 4: Press the desired button on the
remote control(s) that you want to activate
the selected function.
The Status LED will flash twice indicating
that the onboard receiver has learned in the
remote control(s). The onboard buzzer will
also pulse twice.
Step 5: Return the Function Dial to the RUN
position.
page 63
FIGURE 96.
FIGURE 97.