Centurion D2 Turbo Installation Manual page 73

Step 4: Return the Function Dial to the RUN
position.
Please note that PIRAC Mode can
be active in addition to this mode if
so desired.
22.6.2. Open Only Mode
To activate Open Only Mode please follow these steps:
Step 1: Rotate the Function Dial to the
MODE position (D).
Step 2: Rotate the Setting Dial to the OPEN
ONLY selection along the 'D' row of options.
Step 3: Press the pushbutton to select the
setting.
The Status LED will change from red to
green indicating that the Open Only
Operating Mode has been activated.
page 69
FIGURE 116.
FIGURE 117.