Required Tools And Equipment - Centurion D2 Turbo Installation Manual

5. Required Tools and Equipment

 Pull scale - 50kg
Spanner - 17mm; 10mm

Screwdriver - 3.5mm flat

Allen key - 6mm; 4mm

 Crimping tool and pin lugs
 Side cutters
 Hacksaw
 Spirit level
Measuring tape

If casting foundation plate into concrete:
 Pick
 Spade
Long-nosed pliers

If bolting foundation plate onto existing plinth:
 Drilling equipment
 Masonry bits to suit rawlbolts being used
If retrofitting foundation plate to an existing D3 foundation plate:
 Grinder
If welding foundation plate and/or rack to gate:
Welding equipment

 G-clamp, 6 inch x 2
If left-hand side of gearbox is mounted close to a post:
Socket wrench

Extension piece

 17mm socket
If fastening rack to gate:
Drilling equipment

TEK screw socket

page 11