Installation Handover - Centurion D2 Turbo Installation Manual

30. Installation Handover

Once the installation has been successfully completed and tested, it is important for the
installer to explain the operation and safety requirements of the system.
NEVER ASSUME THE USER KNOWS HOW TO SAFELY OPERATE AN
AUTOMATED GATE!
Even if the user has used a gate operator before, it does not mean he knows how to
SAFELY operate it. Make sure that the user fully understands the following safety
requirements before finally handing over the site.
The following needs to be understood by the user:
How to operate the Manual Release thumbwheel mechanism. (Show them how by

demonstration)
How the obstruction detection and all other safety features work. (Show them how

by demonstration)
All the features and benefits of the operator, i.e. Safety Beams, etc.

All the safety considerations associated with operating an automated gate.

The user should be able to pass this knowledge on to all other users of the
automated system and must be made aware of this responsibility


NEVER LET CHILDREN OPERATE OR PLAY WITH THE GATE

CONTROLS, and do not allow children or pets near the gate area
Be careful with moving parts and avoid close proximity to areas

where fingers or hands could be pinched
Secure all easily-accessed gate operator controls in order to prevent

unauthorised use of the gate
Keep the automated gate system properly maintained, and ensure

that all working areas are free of debris and other objects that could
affect the gate operation and safety
On a monthly basis, check the obstruction detection system

and safety devices for correct operation
All repair and service work to this product must be done by

a suitably qualified person
This product was designed and built strictly for the use indicated in

this documentation. Any other use, not expressly indicated here,
could compromise the good condition/operation of the product
and/or be a source of danger!
Centurion Systems (Pty) Ltd does not accept any liability caused by improper use of
the product, or for use other than that for which the automated system was designed.
Ensure that the customer is in possession of the User Guide and that you have
completed the installation details in the back of the User Guide.
Do not activate the gate operator unless you can see it and
can determine that its area of travel is clear of people, pets,
or other obstructions
NO ONE MAY CROSS THE PATH OF A MOVING GATE. Always
keep people and objects away from the gate and its area of
travel
page 88