In this mode and for a particular application should the gate start to close too quickly
the "Auto-close" facility described earlier can be enabled.
The gate will now remain in the open position until either the "auto-close" has timed
out or a vehicle has driven through the entrance in which case the gate will start to
close immediately the vehicle has passed.
Manual Release
All operators are fitted with a manual release mechanism. This is to allow the gate to
be operated in the event of a total malfunction of the equipment. It is also required if
the mains power has failed in the case of the A10 (without DC converter) and FAAC
operators.
CENTURION D3 & D5
USE KEY TO
OPEN DOOR
Open manual override
CENTURION D3 & D5
Manual release
handle in closed position.
20 - Centurion Sliding Gate Operators User Guide
Rotate thumbwheel clockwise
until gate is free to move
Open lock cover and insert key.
Turn key ¼ turn counter
clockwise to unlock.
FAAC 844
ROTATE
THUMBWHEEL
CLOCKWISE
TO RELEASE
FAAC844
Manual Release
Pull manual release handle
down to disengage manual
release