22.3. Deleting specific remote controls
To delete specific remote controls from the D2 Turbo's onboard receiver, please follow
the steps below:
Step 1: Rotate the Function Dial to the
REMOTES position (B).
Step 2: Rotate the Setting Dial to DELETE
Tx along the 'B' row of options. This will
delete specific remote controls from the
onboard receiver's memory.
Step 3: Press the pushbutton to select – the
Status LED will change from red.
Step 4: Press any button on the specific
remote control(s) that you want to delete
from the onboard receiver's memory.
The Status LED will flash green three times
and the buzzer will also beep three times
indicating that the onboard receiver has
deleted the remote control(s) from its
memory.
Step 5: Return the Function Dial to the RUN
position.
page 64
FIGURE 100.
FIGURE 101.