Important Safety Features; Safety Instructions - Centurion D2 Turbo Installation Manual

Domestic sliding gate operator for 250kg gates
Hide thumbs Also See for D2 Turbo:
Table of Contents

Advertisement

ATTENTION
To ensure the safety of people, it is important that
you read all the following instructions.
Incorrect installation or incorrect use of the product could
cause serious harm to people.
The installer, being either professional or DIY, is the last
person on the site who can ensure that the operator is safely
installed, and that the whole system can be operated safely.
Warnings for the Installer
CAREFULLY READ AND FOLLOW ALL INSTRUCTIONS before
beginning to install the product.
 All installation, repair, and service work to this product must be done
by a suitably qualified person
 Do not activate your gate opener unless you can see it and can
determine that its area of travel is clear of people, pets, or other
obstructions
 NO ONE MAY CROSS THE PATH OF A MOVING GATE. Always keep
people and objects away from the gate and its area of travel
 NEVER LET CHILDREN OPERATE OR PLAY WITH THE GATE
CONTROLS, and do not allow children or pets near the gate area
 Secure all easily-accessed gate opener controls in order to prevent
unauthorised operation of the gate
 Do not in any way modify the components of the automated system
 Do not install the equipment in an explosive atmosphere: the
presence of flammable gas or fumes is a serious danger to safety
 Before attempting any work on the system, isolate electrical power
and disconnect the batteries
 The mains power supply of the automated system must be fitted with
an all-pole switch with contact opening distance of 3mm or greater.
The use of a 5A thermal breaker with all-pole circuit break is
recommended
 Make sure that an earth leakage circuit breaker with a threshold of
30mA is fitted upstream of the system
 Never short-circuit the battery and do not try to recharge the
batteries with power supply units other than that supplied with the
product, or supplied by Centurion Systems
 Make sure that the earthing system is correctly constructed, and that
all metal parts of the system are suitably earthed
IMPORTANT

Safety Instructions

page 3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D2 turbo low-voltage

Table of Contents