Table of Contents
Advertisement
17. Manual release operation
1. Hinge open the dust flap, insert key into lock
and give 1/8 turn clockwise.
2. Pull manual release sideways to disengage
gate leaf from operator.
If an external lock is fitted this must
also be released.
3. To re-engage gate leaf, swing handle back to
centre position, re-engage lock and remove
key. Swing leaf and re-engage with drive arm
assembly.
Remember to refit dust cap over lock.
Hinge open
dust flap
Insert key
and turn
Pull manual release
handle sideways
page 39
Dust flap
FIGURE 45
FIGURE 46
Advertisement
Table of Contents
