Centurion D2 Turbo Installation Manual page 65

When using the Select pushbutton to toggle
between preferences the status LED will
light up as green to indicate On or High; or
alternatively red to indicate Off or Low.
The Function Dial must always be
returned to the Run position
(rotated fully counter-clockwise)
after you have finished setting up
any of the features, modes or
profiles. This ensures that it will be
ready for use.
22.1. Remote control administration
The D2 Turbo controllers incorporate an
onboard multichannel receiver compatible
with code-hopping technology.
The receiver will allow any combination of
the different inputs - Trigger (Gate fully
open), Pedestrian, Holiday Lockout, etc.
to be operated from a single multi-button
remote control.
page 61
FIGURE 91.
FIGURE 92.
FIGURE 93.