Centurion D2 Turbo Installation Manual page 61

With PIRAC Mode enabled, your gate will
close as soon as you have driven through
and passed the Safety Beams – giving
intruders no time to follow behind you.
If Autoclose is enabled and the gate has
been opened but nothing moves through the
Closing Safety Beam, the gate will stay fully
open for the duration of the Autoclose timer
before closing. However, if something passes
through the Closing Beam the gate will close
immediately.
If something crosses the beam while the
gate is opening, the gate will continue to
open until the beam is cleared. Once the
beam is cleared, the gate will stop and
close. If the gate has reached its fully open
position, it will stop and remain open until
the beam is cleared.
To enable/disable the PIRAC Mode, please refer to the section, 'Customising the Features
and Functions' on page 60.
page 57
Gate
opening
Beam
FIGURE 82.
Gate
opening
Beam
FIGURE 83.
Gate
closing
FIGURE 84.