Centurion D2 Turbo Installation Manual page 69

22.4. Deleting all remote controls
To delete all the learned-in remote controls from the D2 Turbo onboard receiver, please
follow the steps below:
Step 1: Rotate the Function Dial to the
REMOTES position (B).
Step 2: Rotate the Setting Dial to DELETE
ALL along the 'B' row of options. This will
delete all remote controls from the onboard
receiver's memory.
Step 3: Press the pushbutton to select the
setting.
The Status LED will initially flash red.
Hold down the pushbutton until the Status
LED turns green and three beeps are heard.
This will indicate that the onboard receiver
has deleted the remote control(s) from its
memory.
Step 4: Return the Function Dial to the RUN
position.
page 65
FIGURE 103.
FIGURE 104.
FIGURE 105.