Scrambler Setup - Standard Horizon MATRIX GX2100 Owner's Manual

13.9 SCRAMBLER SETUP

Operates only when the optional CVS2500 is installed. This menu will
not appear unless a CVS2500 is installed.
1. Press and hold down the [ CALL ( MENU )] key until
"Setup Menu" appears.
2. Rotate the CHANNEL knob to select "CH FUNCTION
SETUP".
3. Press the [ SELECT ] soft key, then select "SCRAM-
BLER" with the CHANNEL knob.
4. Press the [ SELECT ] soft key.
5. Rotate the CHANNEL knob to select the channel to
be scrambled and press the [ ENT ] soft key.
6. Rotate the CHANNEL knob to select the scrambler
code. The scrambler code can be set from "0" to "3"
and "Off". When "Off" is selected the voice scram-
bler is disabled.
7. Press the [ ENT ] soft key to store the selected code.
8. Repeat steps 5 through 7 to set other channels.
9. Press the [ QUIT ] soft key several times to return to
radio operation.
Page 94
NOTE
GX2000/GX2100