Scrambler Setup - Standard Horizon MATRIX Series Owner's Manual

11.8 SCRAMBLER SETUP

Operates only when the optional CVS2500 is installed. This menu will
not appear unless a CVS2500 is installed.
1. Press and hold down the
Menu" appears.
2. Rotate the CHANNEL knob to select "CH FUNCTION
SETUP".
3. Press the
with the CHANNEL knob.
4. Press the
5. Rotate the CHANNEL knob to select the channel to
be scrambled and press the
6. Rotate the CHANNEL knob to select the scrambler
code. The scrambler code can be set from "0" to "3"
and "Off". When "Off" is selected the voice scram-
bler is disabled.
7. Press the
8. Repeat steps 5 through 7 to set other channels.
9. Press the
radio operation.
Page 92
NOTE
soft key, then select "SCRAMBLER"
soft key.
soft key to store the selected code.
soft key several times to return to
key until "Setup
soft key.
GX2000/GX2150