Saving The Reported Position As A Waypoint - Standard Horizon HX870 Owner's Manual

10.8.4 Saving the Reported Position as a Waypoint

The HX870 can save a position report call in the radio's memory as a waypoint.
1. After the position report call has been
received, press the [SAVE] soft key.
2. If you want to change the name of the
waypoint, press the CH▼/CH▲ key to select
"NAME", then press the [SELECT] soft key.
3. Enter the name of the waypoint you want
to reference in the directory. For details,
refer to "10.5.1 Setting up the Individual
/ Position Call Directory".
4. Press the CH▼/CH▲ key to select "SAVE",
then press the [ENTER] soft key to save the
waypoint into memory.
5. Press the [OK] soft key to return to the posi-
tion report display.
Navigating to a Saved Waypoint
Refer to section "11.1 STARTING NAVIGATION" for details.
Page 66
RX POS REPORT
987654321
Horizon
SAFETY
CATEG:
24 ° 25.975
POS: N
118 ° 59.456
W
WAYPOINT DIR.
12: 56
POS TM: AM LOC
NAME:
001WPT----------
00:05
SINCE:
POSITION:
SAVE INFO QUIT
WAYPOINT DIR.
NAME
S ---------------
BACK
A B C D E F G H I J K L
WAYPOINT DIR.
M N O P Q R S T U V W X
NAME:
Y Z 1 2 3 4 5 6 7 8 9 0
Horizon----------
a& Delete
BACK FINISH SELECT POSITION:
RX POS REPORT
987654321
Horizon
SAFETY
CATEG:
BACK
24 ° 25.975
POS: N
118 ° 59.456
W
12:56
POS TM: AM LOC
Saved
OK
24 ° 25.975
N
118 ° 59.456
W
SAVE
SELECT
24 ° 25.975
N
118 ° 59.456
W
SAVE
ENTER
HX870