Atis Code Programming - Standard Horizon HX851E Owner's Manual

13.2 ATIS CODE PROGRAMMING

1. Press and hold down the [ CALL ( ENT ) MENU ] key until
the "Setup Menu" appears.
2. Press the [ ] key to select "ATIS Setup" menu.
3. Press the [ CALL ( ENT ) MENU ] key, then select "ATIS
Code" with the [ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to select the first number of
your ATIS, then press the [ CALL ( ENT ) MENU ] key to
step to the next number.
6. Repeat step 5 to set your ATIS (ten digits).
7. If a mistake was made entering, repeatedly press the
[ H/L ( )] key until the wrong number is selected, then
press the [ ] / [ ] key to correct entry.
8. When finished programming the number, press and
hold the [ CALL ( ENT ) MENU ] key. A confirmation mes-
sage will appear on the display. Set your ATIS number
again, then press and hold the [ CALL ( ENT ) MENU ] key.
9. Press the [ CALL ( ENT ) MENU ] key to store the ATIS
number in memory.
10. Press the [ CLR ] key twice to return to radio operation.
HX851E Page 83