Atis Code Programming - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

11.2 ATIS CODE PROGRAMMING

1. Press and hold the
MENU " appears.
2. Press the
SETUP ".
3. Press the
keys to select the " ATIS CODE ".
4. Press the
5. Press the
number of your ATIS, then press the
soft key to move the entry location to the right.
If a mistake was made entering in the ATIS
number, repeat pressing the
until the wrong number is selected, then press
the /
6. Repeat step 5 to set your ATIS (ten digits).
7. When finished programming the ATIS number,
press and hold the
will ask you to input the ATIS number again.
Use steps 5 and 6 above, then press and hold
the soft key.
8. Press the
number in memory.
9. Press the
display to the radio operation mode display.
Page 88
key until " S E T U P
keys to select the " ATIS
/
soft key, then press the
soft key.
/ keys to selec the first
keys to correct the entry.
soft key. The radio
soft key to store the ATIS
soft key twice to return the
-SETUP MENU-
POS INPUT
MMSI SETUP
ATIS SETUP
-ATIS SETUP-
/
ATIS CODE
GROUP
-ATIS SETUP-
INPUT ATIS
ID:1234567890
soft key
-ATIS SETUP-
INPUT AGAIN
ID:----------
-ATIS SETUP-
INPUT AGAIN
ID:1234567890
-ATIS SETUP-
STORED ID
1234567890
GX1200E