Configuring Extensions - Cisco SPA303 Administration Manual

Configuring Lines and Extensions

Configuring Extensions

STEP 5
Configuring Extensions
STEP 1
STEP 2
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameters
Remote Active LED
(applicable only to
shared call
appearance)
Local Held LED
Remote Held LED
(applicable only to
shared call
appearance)
Register Failed LED
Disabled LED
Registering LED
Call Back Active LED
Click Submit All Changes.
For more information on LEDs, see the
page 220.
Log in to the configuration utility.
Click Admin Login and advanced.
Description
Appears when another station is engaged in an active call on
this shared call appearance.
Defaults to blank (c=r;p=d).
Appears when the call appearance is held by this station.
Defaults to blank (c=r;p=s).
Appears when another station places this call appearance on
hold.
Defaults to blank (c=r,p=s).
LED pattern when the corresponding extension has failed to
register with the proxy server. Leaving this entry blank
indicates the default value of c=a.
LED pattern when the Call Appearance is disabled (not
available for any incoming or outgoing call). Leaving this entry
blank indicates the default value of c=o.
Appears when the corresponding extension tries to register
with the proxy server.
Defaults to blanks (c=r;p=s).
Indicates Call Back operation is currently active on this call.
Defaults to blank (c=r;p=s).
"Creating an LED Script" section on
2
43