Download Print this page

Cisco SPA509G Reference Manual

4-line ip phone with 2-port switch spa500g series
Hide thumbs Also See for SPA509G:

Advertisement

i
REFERENCE
CISCO SPA500G SERIES REFERENCE GUIDE
Part of the Cisco Small Business Pro Series, the SIP
based Cisco SPA504G 4-Line IP phone with 2-port
switch has been tested to ensure comprehensive
interoperability with equipment from voice over IP
(VoIP) infrastructure leaders.

Advertisement

loading

Summary of Contents for Cisco SPA509G

  • Page 1 REFERENCE CISCO SPA500G SERIES REFERENCE GUIDE Part of the Cisco Small Business Pro Series, the SIP based Cisco SPA504G 4-Line IP phone with 2-port switch has been tested to ensure comprehensive interoperability with equipment from voice over IP (VoIP) infrastructure leaders.
  • Page 2 REFERENCE TABLE OF CONTENTS CISCO IP PHONE SPA500G PHONE OVERVIEW . CONNECTING YOUR PHONE SOFTKEY BUTTONS . USING YOUR IP PHONE . SNET: CISCO SPA500G SERIES REFERENCE GUIDE...
  • Page 3: Cisco Ip Phone Spa500G Phone Overview

    CISCO IP PHONE SPA500G SERIES PHONE OVERVIEW Part of the Cisco Small Business Pro Series, the SIP based Cisco SPA504G 4-Line IP Phone with 2-Port Switch has been tested to ensure comprehensive interoperability with equipment from voice over IP (VoIP) infrastructure leaders, enabling service providers to quickly roll out competitive, feature-rich services to their customers.
  • Page 4: Connecting Your Phone

    Use to dial phone numbers, enter letters, and choose menu items. CONNECTING YOUR PHONE Your system administrator will likely connect your new Cisco IP Phone to the corporate IP telephony network. If that is not the case, refer to the graphic and table below to connect your phone.
  • Page 5: Softkey Buttons

    • Using a Wireless Connection—You can use a Cisco WBP54G Wireless-G Bridge with the IP phone to create a wireless connection between the phone and the network. See the WBP54G documentation on Cisco.com for more information.
  • Page 6: Using Your Ip Phone

    To put a call on hold, press the Hold button. The caller hears a series of three rapid beeps or music while on hold. To resume the call, press the flashing red line button for the call. For the Cisco SPA502G, press the resume softkey.