Configuring Extensions - Cisco SPA 525G2 Administration Manual

Configuring Lines and Extensions

Configuring Extensions

STEP 5
Configuring Extensions
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
Parameters
Register Failed LED
Disabled LED
Registering LED
Call Back Active LED
Click Submit All Changes.
For more information on LEDs, see the
page 199.
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Ext <number> tab for the extension you want to configure.
In the General section, make sure that Line Enable is set to yes.
You can configure many parameters differently for different extensions. These
parameters are grouped on the Ext <number> tab. These parameters are
explained in other sections of this document:
• NAT, Network, and SIP
NAT."
• Call Feature Settings—Chapter 3, "Customizing Cisco SPA and Wireless
IP Phones."
Description
LED pattern when the corresponding extension has failed to
register with the proxy server. Leaving this entry blank
indicates the default value of c=a.
LED pattern when the Call Appearance is disabled (not
available for any incoming or outgoing call). Leaving this entry
blank indicates the default value of c=o.
Appears when the corresponding extension tries to register
with the proxy server.
Defaults to blanks (c=r;p=s).
Indicates Call Back operation is currently active on this call.
Defaults to blank (c=r;p=s).
"Creating an LED Script" section on
Settings—Chapter 4, "Configuring SIP, SPCP, and
2
33