Regional Parameters And Supplementary Services; Regional Parameters; Set The Control Timer Values; Localize Your Cisco Ip Phone - Cisco 8800 Series Administration Manual

Cisco IP Phone Installation

Regional Parameters and Supplementary Services

Regional Parameters

In the phone web user interface, use the Regional tab to configure regional and local settings, such as control
timer values, dictionary server script, language selection, and locale to change localization. The Regional tab
includes these sections:
• Call Progress Tones—Displays values of all ringtones.
• Distinctive Ring Patterns—Ring cadence defines the ringing pattern that announces a telephone call.
• Control Timer Values—Displays all values in seconds.
• Vertical Service Activation Codes—Includes Call Back Act Code and Call Back Deact Code.
• Outbound Call Codec Selection Codes—Defines the voice quality.
• Time—Includes local date, local time, time zone, and Daylight Saving Time.
• Language—Includes Dictionary Server Script, Language Selection, and Locale.

Set the Control Timer Values

Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > Regional.
Step 2 Configure the values in the fields in the Control Timer Values (sec) section.
Step 3
Click Submit All Changes.

Localize Your Cisco IP Phone

Before you begin
Access the phone administration web page. See
Procedure
Step 1 Select Voice > Regional.
Step 2 Configure the values in the fields in the Time and Language sections.
Access the Phone Web Page, on page
Access the Phone Web Page, on page
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
Regional Parameters and Supplementary Services
88.
88.
79