Regional Parameters And Supplementary Services; Cisco Ip Phone 6800 Series Multiplatform Phones Administration Guide - Cisco IP Phone 6851 Administration Manual

Regional Parameters and Supplementary Services

Edit the Dial Plan on the IP Phone
Procedure
Step 1
In the phone web user interface, navigate to Admin Login > advanced > Voice > Ext(n), where n is an
extension number.
Step 2 Scroll to the Dial Plan section.
Step 3 Enter the digit sequences in the Dial Plan field.
The default (US-based) systemwide dial plan appears automatically in the field.
Step 4 You can delete digit sequences, add digit sequences, or replace the entire dial plan with a new dial plan.
Separate each digit sequence with a pipe character, and enclose the entire set of digit sequences within
parentheses. Example:
(9,8<:1408>[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[1-8]xx)
Step 5 Click Submit All Changes.
The phone reboots.
Step 6
Verify that you can successfully complete a call with each digit sequence that you entered in the dial plan.
Note
Reset the Control Timers
If you need to edit a timer setting only for a particular digit sequence or type of call, you can edit the dial plan.
Procedure
Step 1 Log in to the phone web user interface.
Step 2
Click Admin Login > advanced > Voice > Regional.
Step 3 Scroll to the Control Timer Values (sec) section.
Step 4 Enter the desired values in the Interdigit Long Timer field and the Interdigit Short Timer field.
Step 5 Click Submit All Changes.
Regional Parameters and Supplementary Services
Regional Parameters
In the phone web user interface, use the Regional tab to configure regional and local settings, such as control
timer values, dictionary server script, language selection, and locale to change localization. The Regional tab
includes these sections:

Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide

54
If you hear a reorder (fast busy) tone, review your entries and modify the dial plan appropriately.