Inter-Tel Axxess Administrator's Manual page 139

ADMINISTRATOR FEATURE CODES
The following feature codes may be used only at designated administrator stations. Non-
administrator station users hear reorder tones if they attempt to use these feature codes.
FEATURE NAME
Clear Network Alarm
Clear System Alarm
Compression On/Off
Compression Statistics
Diagnostics On/Off
Enable Network Day
Enable Network Night
Modem Enable
Modem Disable
Modem Reset
Night Ring On/Off
Program Database
Administrator Feature Codes
®
AXXESS ADMINISTRATOR'S GUIDE – January 2004
CODE
9851 Clears network-wide alarms on every node in the network,
but will not affect system alarms. The Clear Network Alarm
feature code may be entered on any node in the network,
but the Send Network Alarms flag must be set for the
administrator to clear alarms on other nodes in the network.
9850 Clears all local and network-wide system alarm displays on
your node.
9962 Compresses call processing messages sent to Database
Programming, speeding up transfers. You should not dis-
able this feature unless instructed to do so by Inter-Tel per-
sonnel.
9961 Dumps various statistics related to the Database Program-
ming compression algorithm. This feature should be used
only when directed to do so by Inter-Tel personnel.
9900 Enables or disables system diagnostics mode to perform
diagnostics functions such as freezing/unfreezing the data-
base, printing message logs, and seizing a device for trou-
bleshooting purposes.
NOTE:
Because diagnostics mode affects system perfor-
mance, it is recommended that you run the diagnostics pro-
gram when the system is idle.
9862 Places any or all remote nodes into day mode (you are
prompted for the node number).
9861 Places any or all remote nodes into night mode (you are
prompted for the node number).
9866 Enables a local or off-node modem in the system using the
modem's assigned extension.
9867 Disables a local or off-node modem in the system using the
modem's assigned extension.
9869 Resets a local or off-node modem if the modem is unable to
answer an incoming call or sync-up with the external
modem.
9860 Places system in night mode or cancels night mode. While
in night mode, the night toll and trunk restriction lists are
used and the night transfer relays on the OPC are activated.
9932 Can be used for programming station, system, and trunk
parameters.
System Features
DEFINITION
Page 123