Do-Not-Disturb Override - Inter-Tel Axxess Administrator's Manual

T
O PLACE YOUR BUSY STATION IN
If, while on a call, you hear call waiting signals and you wish to let the caller know you do not
want to be disturbed:

DO-NOT-DISTURB OVERRIDE

If your Inter-Tel phone is enabled for Do-Not-Disturb override and you hear Do-Not-Disturb
tones when placing an intercom call, you may use the following procedure to break through
Do-Not-Disturb and complete the call.
D -N
O
Do-Not-Disturb Override
Inter-Tel Phones: Press the
Do-Not-Disturb feature code (370 or 372). The button lights. The display shows DO-
NOT-DISTURB ON. The intercom caller is no longer camped on and receives Do-
Not-Disturb indications.
Single-Line Sets: (This procedure will interrupt your call in progress.) Hookflash and
enter the a Do-Not-Disturb feature code (370 or 372). The intercom caller is no longer
camped on and receives Do-Not-Disturb indications. Hookflash twice to return to the
current call.
-D (I
OT ISTURB OVERRIDE NTER
When you hear Do-Not-Disturb tones while placing an intercom call, press the Special
button and enter the Do-Not-Disturb Override feature code (373). If the called station
is idle, the call rings as a private intercom call. If the called station is busy, your call
camps on.
®
AXXESS ADMINISTRATOR'S GUIDE – January 2004
D -N -D
O OT ISTURB WHILE A CALL IS CAMPED ON
button or press the Special button and then enter a
DND
-T
EL PHONES WITH THIS FEATURE ENABLED ONLY
System Features
:
):
Page 251