Microphone Mute - Inter-Tel Axxess Administrator's Manual

System Features
®
AXXESS ADMINISTRATOR'S GUIDE – January 2004

MICROPHONE MUTE

Whether handsfree or using the handset, you can temporarily turn off your microphone while
on a call. The call is still connected; you can hear the other party, but they cannot hear you.
Since the call is not placed on hold, no timer is activated. The
microphone is muted; the light will go off when you press the
microphone.
If you receive an off-hook voice announce call (see
ton while speaking to the off-hook voice announce caller to mute the handset microphone. The
caller on the handset will not hear you or the OHVA caller. When you press
handset microphone is re-enabled.
You cannot mute the microphone on your phone while your call is on hold at another station.
NOTE:
may be a firewall issue. Contact your local Inter-Tel dealer for assistance.
M
UTING THE PHONE MICROPHONE
1.
2.
Page 200
If you receive complaints from IP phone users about losing audio on muted calls, there
:
To temporarily turn off your microphone while on a call, press the
MUTE menu button, or press the Special button and enter the Microphone Mute On/Off
feature code (314). The
MUTE
MUTE ON. If off hook, do not hang up (unless you press the Speaker button first).
Press the lit button or UNMUTE menu button, or press the Special button and
MUTE
enter the feature code (314) to turn the microphone on. The
the display shows MICROPHONE MUTE OFF.
MUTE
MUTE
page 187), you can press the
button is lit, and the display shows MICROPHONE
button is lit when the
button to re-enable the
but-
MUTE
again, the
MUTE
button or
MUTE
button goes off, and
MUTE
Microphone Mute