Notification Numbers - Inter-Tel Axxess Administrator's Manual

Notification Numbers

Each cascade level has a programmed notification number that can be an extension number or
an outside telephone number.
When an outside telephone number is used, the system will access an outgoing trunk using the
code programmed for that level that contains a pre-programmed trunk access code and fol-
lowed by an outgoing access termination feature code, if needed.
Notification calls to outside telephone numbers can be sent to a pager or to a number where a
person will answer (personal number).
•
•
Notification Numbers
AXXESS
If the call goes to a pager, the system will dial the programmed Pager Dial String, then
disconnect the call. The dial string should include any digits that the paging company
requires when the call is answered, the pager LCD number, and the pager termination
code, if needed. Also, if desired, the pager string can be programmed to show the num-
ber of the mailbox that placed the call and/or the number of waiting messages in the
mailbox.
If the call goes to a personal number, the system will play a prompt announcing that the
call is from voice mail, play the directory name or mailbox number that originated the
call, and play user instructions. The listener can then enter the mailbox number's pass-
word to gain access to the mailbox and hear the message. The listener has three chances
to enter a correct password. If the system receives an incorrect password three times,
the voice mail system will disconnect the call immediately, and the attempt is consid-
ered unsuccessful.
Voice Processing Features
®
ADMINISTRATOR'S GUIDE – January 2004
Page 293