Log Set Installation - kozy heat DASSEL DSL-36 Installation And Operation Manual

LOG SET INSTALLATION

ATTENTION: If converting to LP (propane) gas or installing the optional firebrick refractory, do so now
before installing log set. Follow instructions included with conversion kit and / or refractory kit.
NOTE: Logs are installed in numerical order. Log numbers are located on the bottom of each log. Refer
to following instructions and illustrations for proper placement.
CAUTION: Do not place logs directly over burner port holes. Improper log placement may affect flame
appearance and cause excessive soot to build up on logs and glass.
STEP 1: #D1 Log Placement
PLACE THE BACK LOG ON THE TWO
PLATFORMS LOCATED AT THE BACK OF
BURNER. ALIGN THE PINS ON PLATFORMS
WITH THE HOLES IN THE BOTTOM OF LOG.
#D1
PAGE 36